- About Penflex
- Products
- P3 Hose and Braid
- P4 Hose and Braid
- P5 Hose and Braid
- 700 Series
- 800 Series
- 900 Series
- 1400 Series
- 400 Series
- Braid & Braided Product
- Expansion Joints
- Interlocked Hose
- Applications
- Technical Tools
- Resources
- Contact Us
BS EN 10204:2004 Metallic Products: Types of Inspection Documents
- Process Analytics Certificate. Material specification EN 10204-2.1 - InTrac7XX. Products & Solutions. Laboratory Balances. Industrial Scales. Retail Weighing Scales. Rainin Pipettes and Tips. Analytical Instruments. Automated Reactors and In Situ Analysis. Process Analytics.
- Example of a certificate: Down below an example of a certificate issued for customer regarding aluminium flat bar 80 x 10 mm: #1. Certificate issued according to EN 10204. Certificate type 3.1 #2. Information about product, dimension, alloy, temper. Information about product´s alloy composition #4. Mechanical results.
EN 10204: Inspection Documents for All Metallic Products. Inspection Certificate 3.1 – Type 3.1. Designation of Document Type.
En 10204 Type 2.1 Certificate Example Sample
Note: To print, please click here.
Quite often our distributors are asked by end-users for a copy of inspection documents according EN 10204 (especially for the inspection Certificate 3.1 'type 3.1'). In this little bulletin we want to explain what those documents are.
BS EN 10204:2004 is a British Standard that supersedes standard BS EN 10204:1991 and specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, tubes, forgings, castings, whatever their method of production.
Inspection certificate 3.1 'type 3.1' – is simply a document issued by the manufacturer in which he declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results. The test unit and the tests to be carried out are defined by the product specification, the official regulation and corresponding rules and/or the order. The document is validated by the manufacturer`s authorized inspection representative, independent of the manufacturing department.
Manufacturer may transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming products he uses (such as – for example – results of chemical composition analysis or mechanical properties of the strip, provided on the Material Test Reports supplied by the vendor of strip)
Summary of inspection documents according EN 10204
En 10204 Type 2.1
| Designation of the document type | |||||
|---|---|---|---|---|---|
| EN 10204 Reference | English version | German version | French version | Document content | Document validated by |
| Type 2.1 | Declaration of compliance with the order | Werk- bescheinigung | Attestation de conformité á la commande | Statement of compliance with the order | The manufacturer |
| Type 2.2 | Test report | Werkzeugnisse | Relvé de contrôle | Statement of compliance with the order, with indication of results of nonspecific inspection | The manufacturer |
| Type 3.1 | Inspection certificate 3.1 | Abnahmeprüf- zeugnisse 3.1 | Certificat de réception 3.1 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer`s authorized inspection representative, independent of the manufacturing department |
| Type 3.2 | Inspection certificate 3.2 | Abnahmeprüf- zeugnisse 3.2 | Certificat de réception 3.2 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer`s authorized inspection representative independent of the manufacturing department and either the purchaser`s authorized inspection representative or the inspector designated by the official regulations |
- About Penflex
- Products
- P3 Hose and Braid
- P4 Hose and Braid
- P5 Hose and Braid
- 700 Series
- 800 Series
- 900 Series
- 1400 Series
- 400 Series
- Braid & Braided Product
- Expansion Joints
- Interlocked Hose
- Applications
- Technical Tools
- Resources
- Contact Us
BS EN 10204:2004 Metallic Products: Types of Inspection Documents
- Process Analytics Certificate. Material specification EN 10204-2.1 - InTrac7XX. Products & Solutions. Laboratory Balances. Industrial Scales. Retail Weighing Scales. Rainin Pipettes and Tips. Analytical Instruments. Automated Reactors and In Situ Analysis. Process Analytics.
- Example of a certificate: Down below an example of a certificate issued for customer regarding aluminium flat bar 80 x 10 mm: #1. Certificate issued according to EN 10204. Certificate type 3.1 #2. Information about product, dimension, alloy, temper. Information about product´s alloy composition #4. Mechanical results.
EN 10204: Inspection Documents for All Metallic Products. Inspection Certificate 3.1 – Type 3.1. Designation of Document Type.
En 10204 Type 2.1 Certificate Example Sample
Note: To print, please click here.
Quite often our distributors are asked by end-users for a copy of inspection documents according EN 10204 (especially for the inspection Certificate 3.1 'type 3.1'). In this little bulletin we want to explain what those documents are.
BS EN 10204:2004 is a British Standard that supersedes standard BS EN 10204:1991 and specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, tubes, forgings, castings, whatever their method of production.
Inspection certificate 3.1 'type 3.1' – is simply a document issued by the manufacturer in which he declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results. The test unit and the tests to be carried out are defined by the product specification, the official regulation and corresponding rules and/or the order. The document is validated by the manufacturer`s authorized inspection representative, independent of the manufacturing department.
Manufacturer may transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming products he uses (such as – for example – results of chemical composition analysis or mechanical properties of the strip, provided on the Material Test Reports supplied by the vendor of strip)
Summary of inspection documents according EN 10204
En 10204 Type 2.1
| Designation of the document type | |||||
|---|---|---|---|---|---|
| EN 10204 Reference | English version | German version | French version | Document content | Document validated by |
| Type 2.1 | Declaration of compliance with the order | Werk- bescheinigung | Attestation de conformité á la commande | Statement of compliance with the order | The manufacturer |
| Type 2.2 | Test report | Werkzeugnisse | Relvé de contrôle | Statement of compliance with the order, with indication of results of nonspecific inspection | The manufacturer |
| Type 3.1 | Inspection certificate 3.1 | Abnahmeprüf- zeugnisse 3.1 | Certificat de réception 3.1 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer`s authorized inspection representative, independent of the manufacturing department |
| Type 3.2 | Inspection certificate 3.2 | Abnahmeprüf- zeugnisse 3.2 | Certificat de réception 3.2 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer`s authorized inspection representative independent of the manufacturing department and either the purchaser`s authorized inspection representative or the inspector designated by the official regulations |
If you have any questions or comments, please contact us.
To print, please click here.
